CLARIS non-stick bipolar forceps use tips of solid noble metal to give excellent heat conductance away from the active area, preventing the sticking of tissue. Reduction in tissue sticking results in less cleaning and shorter operating times.
		The wide fluted handle incorporated into the CLARIS non-stick bipolar forceps design ensures safe and ergonomic handling.
The insulation coating on the CLARIS non-stick bipolar forceps resists high alkali cleaning agents. CLARIS non-stick bipolar forceps are AUTOCLAVABLE at 137°C

The CLARIS non-stick bipolar forceps body is of hardened stainless steel. This ensures constant spring tension throughout the life of the forceps.		The high precision CLARIS non-stick tips, available in different sizes, enable the forceps to be used with pinpoint accuracy in all applications.

A full range of bipolar cables are available to fit the forceps to your generator.

Claris non stick straight part numbers

grey table line



Tip width	Plug	110 mm non stick straight	150 mm non stick straight	180 mm non stick sstraight	200 mm non stick straight	220 mm non stick straight

0.3 mm		94C-80511100*	94C-80515200	94C-80518200	94C-80520200	94C-80522200
0.6 mm		94C-80511101	94C-80515206	94C-80518206
1.0 mm		94C-80511103	94C-80515201	94C-80518201	94C-80520201	94C-80522201
2.0 mm			94C-80515202	94C-80518202	94C-80520202	94C-80522202

2 pin American fitting forceps below

0.3 mm		94C-80611100*	94C-80615200	94C-80618200	94C-80620200	94C-80622200
0.6 mm		94C-80611101	94C-80615206	94C-80618206
1.0 mm		94C-80611103	94C-80615201	94C-80618201	94C-80620201	94C-80622201
2.0 mm			94C-80615202	94C-80618202	94C-80620202	94C-80622202

Claris non stick bipolar forceps angled part numbers




Tip width	Plug	Claris Non stick 110 mm angled	Claris Non stick 150 mm angled	Claris Non stick 180 mm angled

0.3 mm		94C-80511110*	94C-80515210	94C-80518210
0.6 mm		94C-80511111
1.0 mm		94C-80511113	94C-80515211	94C-80518211
2.0 mm			94C-80520212	94C-80518212

2 pin American fitting forceps below

0.3 mm		94C-80611110*	94C-80615210	94C-80618210
0.6 mm		94C-80611111
1.0 mm		94C-80611113	94C-80615211	94C-80618211
2.0 mm			94C-80620212	94C-80618212

All forceps insulated. * indicates tips 0.25 mm not 0.3 mm

Claris non stick bipolar forceps bayonet



Tip width	Plug	Claris Non stick bayonet 180 mm	Claris Non stick bayonet 200 mm	Claris Non stick bayonet 220 mm	Claris Non stick bayonet 240 mm

0.3 mm		94C-80518300	94C-80520300	94C-80522300	94C-80524300
0.6 mm		94C-80518306	94C-80520306	94C-80522306	94C-80524306
1.0 mm		94C-80518301	94C-80520301	94C-80522301	94C-80524301
2.0 mm		94C-80518302	94C-80520302	94C-80522302	94C-80524302

2 pin fitting American fitting forceps below

0.3 mm		94C-80618300	94C-80620300	94C-80622300	94C-80624300
0.6mm		94C-80618306	94C-80620306	94C-80622306	94C-80624306
1.0 mm		94C-80618301	94C-80620301	94C-80622301	94C-80624301
2.0 mm		94C-80618302	94C-80620302	94C-80622302	94C-80624302

Claris non stick bipolar forceps bayonet angled



Tip width	Plug type	Claris non stick bayonet angled down		Claris non stick bayonet angled up
		200 mm	220 mm	200 mm	220 mm


1.0 mm		94C-80520341	94C-80522341	94C-80520331	94C-80522331

2 pin fitting American fitting forceps below

1.0 mm		94C-80620341	94C-80622341	94C-80620331	94C-80622331

A full range of bipolar cables are available to fit the forceps to your generator.

Unit 27, 865 Ringwood Road,
Bournemouth, Dorset. BH11 8LL
Tel:+44(0) 1202 581645
Fax:+44(0) 1202 593824

Registered in the UK 1368048